Base, sew folder-up Door available left or right

BASE SEW folder-Up with folding plate and with a folding hinged door on the left or right. The built-in electronically controlled RMF-patented easy-Softtech-Lift moves any machine weight effortlessly. The i-Touch control panel with lock and two memory functions embedded in the plate round off the operation. The permanently installed 4-way plug strip with cable feed-through on the back offers you all the necessary power connections in the furniture. Thanks to the uniform RMF - Simply-5 cut-out, the sewing table is compatible with all household machine types, regardless of whether it is a sewing machine, embroidery machine, overlock machine or coverlock machine.

Optional: castors for stone or parquet floors CHF 49.00, free arm insert for flat bed position CHF 160.00.

Colors: white, maple, beech, light oak, dark oak

Optional front in concrete look, diamond grey, sienna red, surcharge CHF 80.00



Base, sew inner sliding doors left right

BASE sew inner with two space-saving sliding doors. With this sewing station it is possible to add additional furniture and corner versions on both sides for your sewing and hobby area. Connecting holes with threaded screws and associated metal sleeves and cover caps make it possible to firmly connect several pieces of furniture. The built-in electronically controlled RMF-patented easy-Softtech lift moves any machine weight effortlessly. The i-Touch control panel with lock and two memory functions embedded in the plate round off the operation. The permanently installed 4-way plug strip with rear cable feed-through offers you all the necessary power connections in the furniture. Thanks to the uniform RMF - Simply-5 cut-out, the sewing table is compatible with all types of household machines, whether sewing machines, embroidery machines, overlock machines or coverlock machines. The space provided on the right-hand inner wall offers space for up to 3 free-arm inserts. The generously designed folding floor creates the necessary large foot space.

Colors: white, maple, beech, light oak, dark oak

Optional front in concrete look, diamond grey, sienna red, surcharge CHF 80.00



Base duo, available left or right

BASE duo. The 520mm wide pull-out container to create additional work space in the room or corner. This ingenious pull-out system turns one piece of furniture into another piece of furniture with additional storage space for small parts and another machine. The top drawer has an internal length of 430mm and a width of 275mm. The maximum loading height is 90mm. The narrow upper storage compartment has the following internal dimensions (HxWxD): 90 x 57 x 458mm. In the lower area there is the partial pull-out floor for a second machine or overlock machine. The maximum internal dimensions are HxWxD 460 x 365 x 458mm.



Base loose, door left or right available

BASE locker, the wide accessory furniture, which can be extended to the left and right with additional furniture, offers enough storage space for starting out in the hobby. This furniture is equipped as follows. At the top left there are 2 thread spool pull-outs that can be fitted with thread spools up to 146mm and 79mm high. There are a total of around 520 holes on these, for which we supply 260 wooden pins. Below there is a partial pull-out shelf for a machine with a maximum size of 460mm long, 350-max. 385mm wide, and a height of 367mm. On the right side there are 6 removable drawers. The top three have an individually removable divider, which allows for up to 12 small compartments.

Optional: Castors for stone or parquet floors Fr. 49.00

Colors: white, maple, beech, light oak, dark oak, surcharge Fr. 80.00

Optional front in concrete look, diamond grey, sienna red



Base layer, door available left or right

BASE layer, the wide accessory furniture, which can be extended to the left and right with additional furniture, offers enough storage space for starting your hobby. This furniture with the two shelves that can be used flexibly on the safety shelf supports is also often stacked on top of one another in the STACK segment as a wall unit. All furniture from the BASE, EXTEND and STACK model series can be connected to one another using the pre-drilled metal connecting screws with sleeves. If this is not desired, cover caps in a matching color are included.

Optional: Castors for stone or parquet floors Fr. 49.00

Colors: white, maple, beech, light oak, dark oak, surcharge Fr. 80.00

Optional front in concrete look, diamond grey, sienna red



Base, fuller, door left or right available

BASE fuller, the wide accessory furniture, which can be extended to the left and right with additional furniture, offers enough storage space to start your hobby. This furniture is equipped as follows. On the left there are 5 thread spool pull-outs with the following assembly heights (from top to bottom) 146mm, 79mm, 111mm, 111mm, 111mm, whereby these can be moved at any time in the 16mm hole row. There are a total of around 1300 holes on these, for which we supply 650 wooden pins. On the right-hand side there are 6 removable drawers. The top three have an individually removable divider, which allows for up to 12 small compartments. This means that you can design your own layout for your accessories. The drawers have an internal width of 275mm and an internal depth of 430mm. The assembly height of the top drawer is 89mm, all others 75mm.

Colors: white, maple, beech, light oak, dark oak, surcharge Fr. 80.00

Optional front in concrete look, diamond grey, sienna red



Base, sixdo, door left or right available

BASE sixdo, the narrow accessory furniture with a hinged door that can be swung flat to the side by up to 270°, offers storage space for a wide variety of haberdashery items for starting out in the hobby. It has 6 removable drawers. The top 3 drawers have individually removable dividers that allow up to 12 small compartments. This means you can design your own layout for your accessories. The drawers have an internal width of 275mm and an internal depth of 430mm. The top drawer has a height of 89mm, all others are 75mm.

Colors: white, maple, beech, light oak, dark oak, surcharge Fr. 80.00

Optional front in concrete look, diamond grey, sienna red



Base, drio, door left or right available

BASE drio, the narrow accessory cabinet with a hinged door that can be swung flat to the side by up to 270°, offers storage space for a wide variety of haberdashery items for starting out in the hobby. The right or left high compartment has the internal dimensions of a height of 651mm, a width of 100mm and a depth of 460mm. In the upper area there are 2 removable thread spool shelves with 260 holes and 130 wooden pins for your thread spools. Below there are 4 removable drawers. Two of them have individually removable dividers, which allow for up to 3 compartments. This means you can design your own layout for your accessories. The drawers have an internal width of 185mm and an internal depth of 409mm. The equipment height is 89mm.

Colors: white, maple, beech, light oak, dark oak, surcharge Fr. 80.00

Optional front in concrete look, diamond grey, sienna red